SQS-040

SQS-040 Right Angle Gearboxes can output up to 50 Nm (depends on ratio), and are suitable for servomotors up to 400W.

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	1
Transmission ratios:	5:1 to 100:1
Backlash:	<13'
Input motor flanges:	For all servomotors
For motor shafts:	⌀9, ⌀11 y ⌀14
Output Shaft	Hollow Output Shaft
Accessories:	Simple or Double Solid Output Shaft Output Flange Torque Arm Extended Input Shaft

Specifications

Ratio	Standard Motor shaft ⌀	n₁=500 min_-1			n₁=1000 min^-1			n₁=1500 min^-1			n₁=3000 min^-1			Backlash (arcmin)	Weight (kg)
Ratio		T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef
i		T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef
5	⌀11, ⌀14	51	64	0.83	42	53	0.85	34	43	0.87	25	31	0.88	<13'	2.4
7.5	⌀11, ⌀14	58	73	0.81	48	60	0.83	40	50	0.85	30	38	0.87	<13'
10	⌀11, ⌀14	59	74	0.79	48	60	0.81	41	51	0.83	31	39	0.86	<13'
15	⌀11, ⌀14	59	74	0.73	49	61	0.76	42	53	0.79	32	40	0.82	<13'
20	⌀11, ⌀14	55	69	0.70	46	58	0.74	40	50	0.76	31	39	0.80	<12'
25	⌀11, ⌀14	48	60	0.65	42	53	0.69	35	44	0.72	27	34	0.76	<12'
30	⌀11, ⌀14	58	73	0.61	48	60	0.65	41	51	0.68	35	44	0.73	<12'
40	⌀11, ⌀14	52	65	0.57	42	53	0.61	38	48	0.64	33	41	0.70	<12'
50	⌀9, ⌀11	51	64	0.51	42	53	0.55	38	48	0.59	30	38	0.65	<12'
65	⌀9, ⌀11	45	56	0.46	39	49	0.51	35	44	0.54	28	35	0.61	<12'
80	⌀9, ⌀11	42	53	0.44	37	46	0.48	33	41	0.52	26	33	0.58	<11'
100	⌀9, ⌀11	32	40	0.41	30	38	0.45	28	35	0.49	25	31	0.55	<11'

Deep grove ball bearings model: 6006
Tappered roller bearings model: 32006
Values for n₁=1400 rpm, for pure axial or radial forces. For combined forces please inquire.
Axial forces are applied in the center of the output shaft
Radial forces assume that you are using the standard single output shaft accessory, with length, measured from the shaft shoulder, L=40 mm. Force application point is at the middle of the output shaft length (L/2).

Dimensions