SVS-090

SVS-090 Right Angle Gearboxes can output up to 550 Nm (depends on ratio), and are suitable for servomotors up to 4kW.

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	1
Transmission ratios:	7.5:1 to 100:1
Backlash:	<9'
Input motor flanges:	For all servomotors
For motor shafts:	⌀19, ⌀24 and ⌀28
Output Shaft	Hollow Output Shaft
Accessories:	Simple or Double Solid Output Shaft Output Flange Torque Arm Extended Input Shaft

Specifications

Ratio	Standard Motor shaft ⌀	n₁=500 min_-1			n₁=1000 min^-1			n₁=1500 min^-1			n₁=3000 min^-1			Backlash (arcmin)	Weight (kg)
Ratio		T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef
i		T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef
7.5	⌀24, ⌀28	430	538	0.84	345	431	0.86	290	363	0.88	209	261	0.89	<9'	16.4
10	⌀24, ⌀28	443	554	0.83	362	453	0.85	305	381	0.86	223	279	0.88	<9'
15	⌀24, ⌀28	456	570	0.79	377	471	0.82	320	400	0.84	241	301	0.86	<9'
20	⌀24, ⌀28	502	628	0.76	419	524	0.79	360	450	0.82	272	340	0.84	<8'
25	⌀24, ⌀28	459	574	0.74	385	481	0.77	332	415	0.80	255	319	0.83	<8'
30	⌀24, ⌀28	483	604	0.68	416	520	0.73	350	438	0.76	270	338	0.79	<8'
40	⌀24	512	640	0.65	440	550	0.69	377	471	0.72	293	366	0.77	<8'
50	⌀24	467	584	0.61	398	498	0.66	353	441	0.69	278	348	0.74	<8'
65	⌀19, ⌀24	417	521	0.57	358	448	0.62	317	396	0.65	250	313	0.71	<8'
80	⌀19, ⌀24	391	489	0.54	337	421	0.59	309	386	0.63	238	298	0.68	<7'
100	⌀19, ⌀24	345	431	0.49	313	391	0.54	264	330	0.58	212	265	0.64	<7'

Deep grove ball bearings model: 6010
Tappered roller bearings model: 32010
Values for n₁=1400 rpm, for pure axial or radial forces. For combined forces please inquire.
Axial forces are applied in the center of the output shaft
Radial forces assume that you are using the standard single output shaft accessory, with length, measured from the shaft shoulder, L=90 mm. Force application point is at the middle of the output shaft length (L/2).

Dimensions