ST-080 / SX-080

ST-080 / SX-080 Planetary Gearboxes can output up to 18000 Nm (depends on ratio)

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	2 to 4 stages
Transmission ratios:	13:0 to 1216.2:1
Efficiency:	Up to 96%
Inputs Types:	IEC Motor Flange Servo Motor Flange Solid Input Shaft with Key Worm Gearbox Flange Hydraulic Motor Flange
Output Shaft Types:	Hollow Shaft with Shrink Disk Hollow DIN 5482 Splined Shaft Hollow Shaft with Keyway Solid Shaft with Key Solid DIN 5482 Splined Shaft
Versions:	With Flange Integrated into the Ring Gear With B5-Style Flange With Feet

Specifications

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
2	13.0	18020	13570	36040	1500	2800
	15.8	18020	13570	36040	1500	2800
	19.0	15700	11830	31400	1500	2800
	21.4	15700	11830	31400	1500	2800
	24.9	15700	11830	31400	1500	2800
	30.0	15700	11830	31400	1500	2800
	39.2	12010	9050	24020	1500	2800
	47.3	9130	6880	18260	1500	2800
3	49.3	18020	13570	36040	1500	2800
	53.8	18020	13570	36040	1500	2800
	59.5	18020	13570	36040	1500	2800
	65.0	18020	13570	36040	1500	2800
	67.4	18020	13570	36040	1500	2800
	73.3	18020	13570	36040	1500	2800
	81.3	18020	13570	36040	1500	2800
	88.4	15700	11830	31400	1500	2800
	94.5	18020	13570	36040	1500	2800
	98.0	15700	11830	31400	1500	2800
	106.7	18020	13570	36040	1500	2800
	114.2	18020	13570	36040	1500	2800
	128.9	18020	13570	36040	1500	2800
	149.1	15700	11830	31400	1500	2800
	155.3	15700	11830	31400	1500	2800
	180.2	15700	11830	31400	1500	2800
	194.9	12010	9050	24020	1500	2800
	217.5	15700	11830	31400	1500	2800
4	175.1	18020	13570	36040	1500	2800
	191.2	18020	13570	36040	1500	2800
	238.8	18020	13570	36040	1500	2800
	287.8	18020	13570	36040	1500	2800
	301.2	18020	13570	36040	1500	2800
	348.6	18020	13570	36040	1500	2800
	363.0	18020	13570	36040	1500	2800
	377.2	18020	13570	36040	1500	2800
	393.6	18020	13570	36040	1500	2800
	438.4	18020	13570	36040	1500	2800
	489.2	18020	13570	36040	1500	2800
	549.1	18020	13570	36040	1500	2800
	582.1	18020	13570	36040	1500	2800
	620.0	18020	13570	36040	1500	2800
	677.9	18020	13570	36040	1500	2800
	720.0	18020	13570	36040	1500	2800
	770.6	18020	13570	36040	1500	2800
	818.8	18020	13570	36040	1500	2800
	849.7	15700	11830	31400	1500	2800
	928.7	15700	11830	31400	1500	2800
	987.2	15700	11830	31400	1500	2800
	1112.9	15700	11830	31400	1500	2800
	1216.2	15700	11830	31400	1500	2800

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
3	40.3	18020	13570	36040	1500	2800
	54.9	18020	13570	36040	1500	2800
	60.3	18020	13570	36040	1500	2800
	72.8	18020	13570	36040	1500	2800
	76.8	15700	11830	31400	1500	2800
	82.2	18020	13570	36040	1500	2800
	99.1	15700	11830	31400	1500	2800
	115.0	15700	11830	31400	1500	2800
	121.1	12010	9050	24020	1500	2800
	138.7	15700	11830	31400	1500	2800
	146.0	9130	6880	18260	1500	2800
	150.2	12010	9050	24020	1500	2800
	181.3	12010	9050	24020	1500	2800
	218.5	9130	6880	36040	1500	2800
4	144.3	18020	13570	36040	1500	2800
	157.6	18020	13570	36040	1500	2800
	174.3	18020	13570	36040	1500	2800
	190.3	18020	13570	36040	1500	2800
	214.9	18020	13570	36040	1500	2800
	238.4	18020	13570	36040	1500	2800
	276.8	18020	13570	36040	1500	2800
	300.4	15700	11830	31400	1500	2800
	333.8	15700	11830	31400	1500	2800
	362.5	15700	11830	31400	1500	2800
	376.2	15700	11830	31400	1500	2800
	403.1	15700	11830	31400	1500	2800
	455.1	15700	11830	31400	1500	2800
	492.2	12010	9050	24020	1500	2800
	527.9	15700	11830	31400	1500	2800
	594.8	12010	9050	24020	1500	2800
	637.2	15700	11830	31400	1500	2800
	690.0	12010	9050	24020	1500	2800
	715.3	9130	6880	18260	1500	2800
	832.7	12010	9050	24020	1500	2800
	1003.7	9130	6880	18260	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensions