SQS-130

SQS-130 Right Angle Gearboxes can output up to 1500 Nm (depends on ratio), and are suitable for servomotors up to 7,5kW.

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	1
Transmission ratios:	7.5:1 to 100:1
Backlash:	<8'
Input motor flanges:	For all servomotors
For motor shafts:	⌀24, ⌀28 and ⌀38
Output Shaft	Hollow Output Shaft
Accessories:	Simple or Double Solid Output Shaft Output Flange Torque Arm Extended Input Shaft

Specifications

Ratio	Standard Motor shaft ⌀	n₁=500 min_-1			n₁=1000 min^-1			n₁=1500 min^-1			n₁=3000 min^-1			Backlash (arcmin)	Weight (kg)
Ratio		T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef
i		T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef	T_2N (Nm)	T_2max (Nm)	Ef
7.5	⌀28, ⌀38	1109	1386	0.86	889	1111	0.88	736	920	0.89	530	663	0.90	<8'	55
10	⌀28, ⌀38	1107	1384	0.84	905	1131	0.87	756	945	0.88	549	686	0.89	<8'
15	⌀28, ⌀38	1230	1538	0.81	1016	1270	0.84	855	1069	0.85	636	795	0.87	<8'
20	⌀28, ⌀38	1388	1735	0.79	1149	1436	0.82	974	1218	0.84	733	916	0.86	<7'
25	⌀28, ⌀38	1266	1583	0.78	1074	1343	0.81	920	1150	0.83	710	888	0.85	<7'
30	⌀28, ⌀38	1320	1650	0.72	1113	1391	0.76	947	1184	0.79	729	911	0.81	<7'
40	⌀28, ⌀38	1423	1779	0.69	1208	1510	0.73	1037	1296	0.76	819	1024	0.80	<7'
50	⌀28	1261	1576	0.66	1077	1346	0.70	959	1199	0.74	758	948	0.78	<7'
65	⌀24, ⌀28	1095	1369	0.63	924	1155	0.67	801	1001	0.71	648	810	0.75	<7'
80	⌀24, ⌀28	1082	1353	0.59	869	1086	0.64	758	948	0.68	637	796	0.73	<7'
100	⌀24, ⌀28	945	1181	0.55	828	1035	0.60	699	874	0.64	597	746	0.70	<7'

Deep grove ball bearings model: 6015
Tappered roller bearings model: 32015
Values for n₁=1400 rpm, for pure axial or radial forces. For combined forces please inquire.
Axial forces are applied in the center of the output shaft
Radial forces assume that you are using the standard single output shaft accessory, with length, measured from the shaft shoulder, L=90 mm. Force application point is at the middle of the output shaft length (L/2).

Dimensions