ST-030 / SX-030

ST-030 / SX-030 Planetary Gearboxes can output up to 3500 Nm (depends on ratio)

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	1 to 4 stages
Transmission ratios:	3.77:1 to 2369.3:1
Efficiency:	Up to 98%
Inputs Types:	IEC Motor Flange Servo Motor Flange Solid Input Shaft with Key Worm Gearbox Flange Hydraulic Motor Flange
Output Shaft Types:	Hollow Shaft with Shrink Disk Hollow DIN 5482 Splined Shaft Hollow Shaft with Keyway Solid Shaft with Key Solid DIN 5482 Splined Shaft
Versions:	With Flange Integrated into the Ring Gear With B5-Style Flange With B5-Style Flange and Reinforced Bearings With Feet

Specifications

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
1	3.77	3520	2650	7040	1500	2800
	4.12	3190	2400	6380	1500	2800
	5.16	2660	2000	5320	1500	2800
	6.00	2230	1680	4460	1500	2800
	7.25	1730	1300	3460	1500	2800
2	13.4	3520	2650	7040	1500	2800
	16.2	3520	2650	7040	1500	2800
	18.4	2660	2000	5320	1500	2800
	23.1	3190	2400	6380	1500	2800
	28.9	2660	2000	5320	1500	2800
	34.9	2660	2000	5320	1500	2800
	40.5	2230	1680	4460	1500	2800
	48.9	1730	1300	3460	1500	2800
	62.8	1730	1300	3460	1500	2800
3	47.8	3520	2650	7040	1500	2800
	52.2	3190	2400	6380	1500	2800
	57.6	3520	2650	7040	1500	2800
	62.9	3190	2400	6380	1500	2800
	75.2	3520	2650	7040	1500	2800
	82.1	3190	2400	6380	1500	2800
	90.7	3520	2650	7040	1500	2800
	99.0	3190	2400	6380	1500	2800
	119.3	3190	2400	6380	1500	2800
	129.4	3190	2400	6380	1500	2800
	149.4	2660	2000	5320	1500	2800
	155.9	3190	2400	6380	1500	2800
	162.0	2660	2000	5320	1500	2800
	173.5	2230	1680	4460	1500	2800
	195.3	2660	2000	5320	1500	2800
	235.4	2660	2000	5320	1500	2800
	273.4	2230	1680	4460	1500	2800
	302.2	2660	2000	5320	1500	2800
	330.3	1730	1300	3460	1500	2800
	424.1	1730	1300	3460	1500	2800
4	351.9	3190	2400	6380	1500	2800
	365.8	2660	2000	5320	1500	2800
	388.5	3520	2650	7040	1500	2800
	413.9	3520	2650	7040	1500	2800
	424.2	3190	2400	6380	1500	2800
	468.2	3520	2650	7040	1500	2800
	511.3	3190	2400	6380	1500	2800
	554.3	3190	2400	6380	1500	2800
	611.9	3520	2650	7040	1500	2800
	668.3	3190	2400	6380	1500	2800
	737.6	3520	2650	7040	1500	2800
	805.4	3190	2400	6380	1500	2800
	857.9	3190	2400	6380	1500	2800
	907.4	2660	2000	5320	1500	2800
	1052.5	3190	2400	6380	1500	2800
	1121.1	3190	2400	6380	1500	2800
	1318.3	2660	2000	5320	1500	2800
	1589.0	2660	2000	5320	1500	2800
	1845.3	2230	1680	4460	1500	2800
	2369.3	2230	1680	4460	1500	2800

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
2	12.1	3190	2400	6380	1500	2800
	15.1	2660	2000	5320	1500	2800
	17.6	2230	1680	4460	1500	2800
	21.2	1730	1300	3460	1500	2800
3	39.4	3520	2650	7040	1500	2800
	47.4	3520	2650	7040	1500	2800
	53.8	2660	2000	5320	1500	2800
	67.7	3190	2400	6380	1500	2800
	75.3	2230	1680	4460	1500	2800
	84.8	2660	2000	5320	1500	2800
	91.0	1730	1300	3460	1500	2800
	102.2	2660	2000	5320	1500	2800
	118.7	2230	1680	4460	1500	2800
	143.4	1730	1300	3460	1500	2800
	184.1	1730	1300	3460	1500	2800
4	139.9	3520	2650	7040	1500	2800
	168.6	3520	2650	7040	1500	2800
	184.1	3190	2400	6380	1500	2800
	220.4	3520	2650	7040	1500	2800
	240.7	3190	2400	6380	1500	2800
	265.6	3520	2650	7040	1500	2800
	290.1	3190	2400	6380	1500	2800
	320.2	3520	2650	7040	1500	2800
	349.6	3190	2400	6380	1500	2800
	421.9	2230	1680	4460	1500	2800
	448.8	3190	2400	6380	1500	2800
	474.7	2660	2000	5320	1500	2800
	508.5	2230	1680	4460	1500	2800
	551.3	2230	1680	4460	1500	2800
	614.4	1730	1300	3460	1500	2800
	664.5	2230	1680	4460	1500	2800
	734.7	2660	2000	5320	1500	2800
	801.0	2230	1680	4460	1500	2800
	1242.7	1730	1300	3460	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensions