ST-200 / SX-200

ST-200 / SX-200 Planetary Gearboxes can output up to 572000 Nm (depends on ratio)

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	1 to 5 stages
Transmission ratios:	3.84:1 to 3719.8:1
Efficiency:	Up to 98%
Inputs Types:	IEC Motor Flange Servo Motor Flange Solid Input Shaft with Key Worm Gearbox Flange Hydraulic Motor Flange
Output Shaft Types:	Hollow Shaft with Shrink Disk Hollow DIN 5480 Splined Shaft Solid Shaft with Key Solid DIN 5480 Splined Shaft
Versions:	With Flange Integrated into the Ring Gear

Specifications

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
1	3.84	572300	450000	743990	50	100
2	15.0	572300	450000	743990	100	200
3	59.3	572300	450000	743990	800	1200
3	76.0	572300	450000	743990	800	1200
4	210.9	572300	450000	743990	1200	2000
	270.3	572300	450000	743990	1200	2000
	325.7	572300	450000	743990	1200	2000
	425.7	572300	450000	743990	1200	2000
	513.1	572300	450000	743990	1200	2000
5	796.6	572300	450000	743990	1500	2800
	869.8	572300	450000	743990	1500	2800
	960.0	572300	450000	743990	1500	2800
	1021.0	572300	450000	743990	1500	2800
	1114.8	572300	450000	743990	1500	2800
	1254.7	572300	450000	743990	1500	2800
	1370.0	572300	450000	743990	1500	2800
	1608.0	572300	450000	743990	1500	2800
	1755.8	572300	450000	743990	1500	2800
	1842.4	572300	450000	743990	1500	2800
	1938.3	572300	450000	743990	1500	2800
	2116.4	572300	450000	743990	1500	2800
	2361.4	572300	450000	743990	1500	2800
	2407.9	572300	450000	743990	1500	2800
	2554.0	572300	450000	743990	1500	2800
	3078.4	572300	450000	743990	1500	2800
	3719.8	572300	450000	743990	1500	2800

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
5	586.2	572300	450000	743990	1500	2800
	751.3	572300	450000	743990	1500	2800
	923.3	572300	450000	743990	1500	2800
	1089.0	572300	450000	743990	1500	2800
	1183.3	572300	450000	743990	1500	2800
	1395.6	572300	450000	743990	1500	2800
	1426.3	572300	450000	743990	1500	2800
	1824.0	572300	450000	743990	1500	2800
	2198.5	572300	450000	743990	1500	2800
6	1832.2	572300	450000	743990	1500	2800
	2348.2	572300	450000	743990	1500	2800
	2830.0	572300	450000	743990	1500	2800
	3698.5	572300	450000	743990	1500	2800
	4232.7	572300	450000	743990	1500	2800
	4458.0	572300	450000	743990	1500	2800
	5531.7	572300	450000	743990	1500	2800
	6667.6	572300	450000	743990	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensions