ST-130 / SX-130

ST-130 / SX-130 Planetary Gearboxes can output up to 69300 Nm (depends on ratio)

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	1 to 4 stages
Transmission ratios:	3.83:1 to 1402.3:1
Efficiency:	Up to 98%
Inputs Types:	IEC Motor Flange Servo Motor Flange Solid Input Shaft with Key Worm Gearbox Flange Hydraulic Motor Flange
Output Shaft Types:	Hollow Shaft with Shrink Disk Hollow DIN 5480 Splined Shaft Solid Shaft with Key Solid DIN 5480 Splined Shaft
Versions:	With Flange Integrated into the Ring Gear With B5-Style Flange With Feet

Specifications

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
1	3.83	69310	52210	138620	600	1000
1	4.42	59850	45100	119700	600	1000
2	15.3	69310	52210	138620	1000	1500
	19.9	69310	52210	138620	1000	1500
	23.9	69310	52210	138620	1000	1500
	27.6	59850	45100	119700	1000	1500
3	56.1	69310	52210	138620	1500	2500
	67.8	69310	52210	138620	1500	2500
	73.0	69310	52210	138620	1500	2500
	88.8	69310	52210	138620	1500	2500
	99.5	69310	52210	138620	1500	2500
	115.4	69310	52210	138620	1500	2500
	123.8	59850	45100	119700	1500	2500
	138.7	69310	52210	138620	1500	2500
	167.4	69310	52210	138620	1500	2500
	193.4	59850	45100	119700	1500	2500
4	212.0	69310	52210	138620	1500	2800
	231.5	69310	52210	138620	1500	2800
	256.0	69310	52210	138620	1500	2800
	279.6	69310	52210	138620	1500	2800
	300.9	69310	52210	138620	1500	2800
	335.3	69310	52210	138620	1500	2800
	363.5	69310	52210	138620	1500	2800
	395.4	69310	52210	138620	1500	2800
	406.8	69310	52210	138620	1500	2800
	455.2	69310	52210	138620	1500	2800
	514.0	69310	52210	138620	1500	2800
	554.8	69310	52210	138620	1500	2800
	596.9	69310	52210	138620	1500	2800
	643.6	69310	52210	138620	1500	2800
	690.5	69310	52210	138620	1500	2800
	721.2	69310	52210	138620	1500	2800
	836.6	69310	52210	138620	1500	2800
	1009.7	69310	52210	138620	1500	2800
	1213.6	69310	52210	138620	1500	2800
	1402.3	59850	45100	119700	1500	2800

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
3	54.2	69310	52210	138620	1500	2500
	70.8	69310	52210	138620	1500	2500
	92.0	69310	52210	138620	1500	2500
	110.6	69310	52210	138620	1500	2500
	127.8	59850	45100	119700	1500	2500
4	188.6	69310	52210	138620	1500	2800
	227.7	69310	52210	138620	1500	2800
	257.1	69310	52210	138620	1500	2800
	298.3	69310	52210	138620	1500	2800
	313.5	69310	52210	138620	1500	2800
	334.3	69310	52210	138620	1500	2800
	387.7	69310	52210	138620	1500	2800
	407.5	69310	52210	138620	1500	2800
	460.1	69310	52210	138620	1500	2800
	489.8	69310	52210	138620	1500	2800
	533.7	69310	52210	138620	1500	2800
	572.5	59850	45100	119700	1500	2800
	641.5	69310	52210	138620	1500	2800
	744.3	59850	45100	119700	1500	2800
	894.6	59850	45100	119700	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensions