ST-010 / SX-010 | Servotak

Los reductores planetarios ST-010 / SX-010 transmiten hasta 1100 Nm según relación de transmisión

Recursos Adicionales:

Seleccione el reductor para su motor

Calcule su máquina con esta herramienta

Horizontal Tabs

Vista general

Número de etapas:	1 a 4 etapas
Relación de transmisión:	3.65:1 a 3422.2:1
Eficiencia:	Hasta 98%
Bridas de entrada:	Para motores asíncronos y servomotores
Eje de salida:	Eje macizo con chaveta Eje hueco con anillo de contracción Eje macizo estriado Eje hueco estriado
Ejecuciones Mecánicas:	Brida de salida Patas

Especificaciones

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
1	3.56	1120	850	2240	1500	2800
	4.29	1120	850	2240	1500	2800
	5.60	820	610	1640	1500	2800
	6.75	710	540	1420	1500	2800
	8.67	460	350	920	1500	2800
2	12.6	1120	850	2240	1500	2800
	15.2	1120	850	2240	1500	2800
	19.9	1120	850	2240	1500	2800
	24.0	1120	850	2240	1500	2800
	28.9	1120	850	2240	1500	2800
	31.4	820	610	1640	1500	2800
	37.8	820	610	1640	1500	2800
	45.6	710	540	1420	1500	2800
	58.5	710	540	1420	1500	2800
3	54.2	1120	850	2240	1500	2800
	65.3	1120	850	2240	1500	2800
	70.8	1120	850	2240	1500	2800
	78.7	1120	850	2240	1500	2800
	85.3	1120	850	2240	1500	2800
	102.9	1120	850	2240	1500	2800
	111.5	1120	850	2240	1500	2800
	134.4	1120	850	2240	1500	2800
	162.0	1120	850	2240	1500	2800
	172.6	1120	850	2240	1500	2800
	208.0	1120	850	2240	1500	2800
	211.7	820	610	1640	1500	2800
	255.2	820	610	1640	1500	2800
	271.8	820	610	1640	1500	2800
	307.5	710	540	1420	1500	2800
	327.6	820	610	1640	1500	2800
	394.9	710	540	1420	1500	2800
4	337.4	1120	850	2240	1500	2800
	365.7	1120	850	2240	1500	2800
	396.4	1120	850	2240	1500	2800
	440.8	1120	850	2240	1500	2800
	477.9	1120	850	2240	1500	2800
	531.3	1120	850	2240	1500	2800
	576.0	1120	850	2240	1500	2800
	624.4	1120	850	2240	1500	2800
	694.3	1120	850	2240	1500	2800
	752.6	1120	850	2240	1500	2800
	836.9	1120	850	2240	1500	2800
	907.2	1120	850	2240	1500	2800
	966.3	1120	850	2240	1500	2800
	1093.5	1120	850	2240	1500	2800
	1144.5	1120	850	2240	1500	2800
	1185.4	820	610	1640	1500	2800
	1318.1	1120	850	2240	1500	2800
	1428.8	820	610	1640	1500	2800
	1692.3	1120	850	2240	1500	2800
	3422.2	710	540	1420	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensiones