ST-050 / SX-050 | Servotak

Los reductores planetarios ST-050 / SX-050 transmiten hasta 7000 Nm según relación de transmisión

Recursos Adicionales:

Seleccione el reductor para su motor

Calcule su máquina con esta herramienta

Horizontal Tabs

Vista general

Número de etapas:	1 a 4 etapas
Relación de transmisión:	3.67:1 a 2968.9:1
Eficiencia:	Hasta 98%
Bridas de entrada:	Para motores asíncronos y servomotores
Eje de salida:	Eje macizo con chaveta Eje hueco con anillo de contracción Eje macizo estriado Eje hueco estriado
Ejecuciones Mecánicas:	Brida de salida Patas

Especificaciones

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
1	3.67	7160	5400	14320	1500	2800
	4.43	6540	4930	13080	1500	2800
	5.00	5740	4320	11480	1500	2800
	5.80	4860	3660	9720	1500	2800
	7.00	3930	2960	7860	1500	2800
2	13.9	7160	5400	14320	1500	2800
	18.3	6540	4930	13080	1500	2800
	20.6	5740	4320	11480	1500	2800
	22.9	6540	4930	13080	1500	2800
	26.6	6540	4930	13080	1500	2800
	30.0	5740	4320	11480	1500	2800
	36.3	5740	4320	11480	1500	2800
	42.1	4860	3660	9720	1500	2800
	50.8	3930	2960	7860	1500	2800
3	53.8	7160	5400	14320	1500	2800
	64.8	7160	5400	14320	1500	2800
	71.7	6540	4930	13080	1500	2800
	78.3	6540	4930	13080	1500	2800
	88.4	5740	4320	11480	1500	2800
	93.7	6540	4930	13080	1500	2800
	102.1	7160	5400	14320	1500	2800
	112.9	6540	4930	13080	1500	2800
	127.9	7160	5400	14320	1500	2800
	139.2	5740	4320	11480	1500	2800
	148.8	6540	4930	13080	1500	2800
	155.4	5740	4320	11480	1500	2800
	174.4	5740	4320	11480	1500	2800
	194.9	4860	3660	9720	1500	2800
	216.7	6540	4930	13080	1500	2800
	244.7	5740	4320	11480	1500	2800
	283.8	4860	3660	9720	1500	2800
	342.6	3930	2960	7860	1500	2800
4	301.1	7160	5400	14320	1500	2800
	332.4	7160	5400	14320	1500	2800
	347.9	7160	5400	14320	1500	2800
	400.7	7160	5400	14320	1500	2800
	434.4	7160	5400	14320	1500	2800
	474.3	7160	5400	14320	1500	2800
	523.6	7160	5400	14320	1500	2800
	571.7	7160	5400	14320	1500	2800
	632.4	6540	4930	13080	1500	2800
	661.9	6540	4930	13080	1500	2800
	747.3	5740	4320	11480	1500	2800
	768.7	6540	4930	13080	1500	2800
	832.3	6540	4930	13080	1500	2800
	870.0	5740	4320	11480	1500	2800
	976.5	5740	4320	11480	1500	2800
	1048.7	5740	4320	11480	1500	2800
	1177.0	5740	4320	11480	1500	2800
	1366.9	5740	4320	11480	1500	2800
	1651.6	5740	4320	11480	1500	2800
	2968.9	3930	2960	7860	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensiones