ST-040 / SX-040

Los reductores planetarios ST-040 / SX-040 transmiten hasta 5100 Nm según relación de transmisión

Recursos Adicionales:

Seleccione el reductor para su motor

Calcule su máquina con esta herramienta

Horizontal Tabs

Vista general

Número de etapas:	1 a 4 etapas
Relación de transmisión:	3.78:1 to 1845.3:1
Eficiencia:	Hasta 98%
Bridas de entrada:	Para motores asíncronos y servomotores
Eje de salida:	Eje macizo con chaveta Eje hueco con anillo de contracción Eje macizo estriado Eje hueco estriado
Ejecuciones Mecánicas:	Brida de salida Patas

Especificaciones

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
1	3.78	5210	3930	10420	1500	2800
	4.13	4750	3580	9500	1500	2800
	5.17	3890	2930	7780	1500	2800
	6.00	3410	2570	6820	1500	2800
	7.25	2660	2010	5320	1500	2800
2	13.4	5210	3930	10420	1500	2800
	16.2	5210	3930	10420	1500	2800
	18.4	3890	2930	7780	1500	2800
	23.1	4750	3580	9500	1500	2800
	28.9	3890	2930	7780	1500	2800
	34.9	3890	2930	7780	1500	2800
	40.5	3410	2570	6820	1500	2800
	48.9	2660	2010	5320	1500	2800
3	52.1	4750	3580	9500	1500	2800
	57.6	5210	3930	10420	1500	2800
	62.9	4750	3580	9500	1500	2800
	75.2	5210	3930	10420	1500	2800
	82.1	4750	3580	9500	1500	2800
	90.7	5210	3930	10420	1500	2800
	99.0	4750	3580	9500	1500	2800
	119.3	4750	3580	9500	1500	2800
	129.4	4750	3580	9500	1500	2800
	149.5	3890	2930	7780	1500	2800
	155.9	4750	3580	9500	1500	2800
	162.0	3890	2930	7780	1500	2800
	173.6	3410	2570	6820	1500	2800
	195.3	3890	2930	7780	1500	2800
	235.4	3890	2930	7780	1500	2800
	273.4	3410	2570	6820	1500	2800
	302.2	3890	2930	7780	1500	2800
	330.3	2660	2010	5320	1500	2800
4	352.0	4750	3580	9500	1500	2800
	365.8	3890	2930	7780	1500	2800
	388.6	5210	3930	10420	1500	2800
	413.9	5210	3930	10420	1500	2800
	424.3	4750	3580	9500	1500	2800
	468.4	5210	3930	10420	1500	2800
	511.4	4750	3580	9500	1500	2800
	554.4	4750	3580	9500	1500	2800
	612.0	5210	3930	10420	1500	2800
	668.2	4750	3580	9500	1500	2800
	737.7	5210	3930	10420	1500	2800
	805.5	4750	3580	9500	1500	2800
	858.0	4750	3580	9500	1500	2800
	907.3	3890	2930	7780	1500	2800
	1052.5	4750	3580	9500	1500	2800
	1121.1	4750	3580	9500	1500	2800
	1318.3	3890	2930	7780	1500	2800
	1589.0	3890	2930	7780	1500	2800
	1845.3	3410	2570	6820	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensiones