ST-100 / SX-100

ST Gearboxes

ST-100 / SX-100 Planetary Gearboxes can output up to 30700 Nm (depends on ratio)

Horizontal Tabs

Overview

Performance data:

Number of stages: 2 to 4 stages
Transmission ratios: 14.2:1 to 1425.1:1
Efficiency: Up to 96%
Inputs Types: IEC Motor Flange
Servo Motor Flange
Solid Input Shaft with Key
Worm Gearbox Flange
Hydraulic Motor Flange
Output Shaft Types: Hollow Shaft with Shrink Disk
Hollow DIN 5482 Splined Shaft
Hollow Shaft with Keyway
Solid Shaft with Key
Solid DIN 5482 Splined Shaft
Versions: With Flange Integrated into the Ring Gear
With B5-Style Flange
With Feet

Typical Applications:

  • Cement and Mining
  • Chemical and Paper Industry
  • Conveyors
  • Cranes and Construction Machinery
  • Food and Beverages
  • Metalworking machines
  • Pumps and Compressors
  • Water Treatment
  • Wind Energy
  • Woodworking Machines

Advantages:

  • Excellent reliability
  • Compact design
  • High power density (Nm / dm3)
  • Low volume and weight
  • Intermittent and continuous operation
  • ATEX standard requirements
  • Optional NSF H1 certified food grade lubrication
  • For any mounting position
Specifications

ST-100 (In Line)

Stages Ratio T2N(1.2M) T2N(6M) T2Peak n1N n1max
(Nm) (Nm) (Nm) (rpm) (rpm)
2 14.2 30760 23170 61520 1200 2000
17.1 30760 23170 61520 1200 2000
22.4 30760 23170 61520 1200 2000
29.1 23780 17910 47560 1200 2000
35.1 23780 17910 47560 1200 2000
3 53.7 30760 23170 61520 1500 2800
64.7 30760 23170 61520 1500 2800
70.7 30760 23170 61520 1500 2800
73.5 30760 23170 61520 1500 2800
88.6 30760 23170 61520 1500 2800
92.4 30760 23170 61520 1500 2800
102.9 30760 23170 61520 1500 2800
115.7 30760 23170 61520 1500 2800
124.3 30760 23170 61520 1500 2800
134.4 30760 23170 61520 1500 2800
162.4 30760 23170 61520 1500 2800
174.7 23780 17910 47560 1500 2800
181.3 23780 17910 47560 1500 2800
4 191.0 30760 23170 61520 1500 2800
208.6 30760 23170 61520 1500 2800
251.4 30760 23170 61520 1500 2800
277.5 30760 23170 61520 1500 2800
300.9 30760 23170 61520 1500 2800
314.9 30760 23170 61520 1500 2800
328.5 30760 23170 61520 1500 2800
362.6 30760 23170 61520 1500 2800
379.5 30760 23170 61520 1500 2800
396.0 30760 23170 61520 1500 2800
437.1 30760 23170 61520 1500 2800
477.3 30760 23170 61520 1500 2800
495.9 30760 23170 61520 1500 2800
517.4 30760 23170 61520 1500 2800
532.5 30760 23170 61520 1500 2800
576.0 30760 23170 61520 1500 2800
597.8 30760 23170 61520 1500 2800
623.7 30760 23170 61520 1500 2800
694.2 30760 23170 61520 1500 2800
752.6 30760 23170 61520 1500 2800
781.2 30760 23170 61520 1500 2800
838.8 30760 23170 61520 1500 2800
1015.5 23780 17910 47560 1500 2800
1164.8 30760 23170 61520 1500 2800
1254.8 23780 17910 47560 1500 2800
1425.0 23780 17910 47560 1500 2800

SX-100 (Right Angle)

Stages Ratio T2N(1.2M) T2N(6M) T2Peak n1N n1max
(Nm) (Nm) (Nm) (rpm) (rpm)
3 39.5 30760 23170 61520 1500 2800
47.7 30760 23170 61520 1500 2800
51.4 23780 17910 47560 1500 2800
60.9 30760 23170 61520 1500 2800
73.4 30760 23170 61520 1500 2800
81.0 23780 17910 47560 1500 2800
96.0 30760 23170 61520 1500 2800
124.8 23780 17910 47560 1500 2800
150.4 23780 17910 47560 1500 2800
4 123.6 30760 23170 61520 1500 2800
134.9 30760 23170 61520 1500 2800
169.0 30760 23170 61520 1500 2800
196.3 30760 23170 61520 1500 2800
237.2 30760 23170 61520 1500 2800
252.8 30760 23170 61520 1500 2800
293.5 30760 23170 61520 1500 2800
304.6 30760 23170 61520 1500 2800
317.9 30760 23170 61520 1500 2800
353.8 30760 23170 61520 1500 2800
398.1 30760 23170 61520 1500 2800
427.5 30760 23170 61520 1500 2800
462.3 30760 23170 61520 1500 2800
498.1 23780 17910 47560 1500 2800
517.6 23780 17910 47560 1500 2800
558.7 30760 23170 61520 1500 2800
601.0 23780 17910 47560 1500 2800
623.8 23780 17910 47560 1500 2800
724.5 23780 17910 47560 1500 2800
875.4 23780 17910 47560 1500 2800
  • T2N values are calculated at n1=n1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
  • T2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
  • n1N is the rated input speed for continuous operation
  • n1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n1n please inquire
Dimensions
ST-100 / SX-100 Dimensions