ST-110 / SX-110

ST Gearboxes

ST-110 / SX-110 Planetary Gearboxes can output up to 37500 Nm (depends on ratio)

Horizontal Tabs

Overview

Performance data:

Number of stages: 1 to 4 stages
Transmission ratios: 4.00:1 to 1554.5:1
Efficiency: Up to 98%
Inputs Types: IEC Motor Flange
Servo Motor Flange
Solid Input Shaft with Key
Worm Gearbox Flange
Hydraulic Motor Flange
Output Shaft Types: Hollow Shaft with Shrink Disk
Hollow DIN 5480 Splined Shaft
Hollow Shaft with Keyway
Solid Shaft with Key
Solid DIN 5480 Splined Shaft
Versions: With Flange Integrated into the Ring Gear
With B5-Style Flange
With Feet

Typical Applications:

  • Cement and Mining
  • Chemical and Paper Industry
  • Conveyors
  • Cranes and Construction Machinery
  • Food and Beverages
  • Metalworking machines
  • Pumps and Compressors
  • Water Treatment
  • Wind Energy
  • Woodworking Machines

Advantages:

  • Excellent reliability
  • Compact design
  • High power density (Nm / dm3)
  • Low volume and weight
  • Intermittent and continuous operation
  • ATEX standard requirements
  • Optional NSF H1 certified food grade lubrication
  • For any mounting position
Specifications

ST-110 (In Line)

Stages Ratio T2N(1.2M) T2N(6M) T2Peak n1N n1max
(Nm) (Nm) (Nm) (rpm) (rpm)
1 4.00 37500 28250 61875 1000 1500
4.71 31960 24070 52764 1000 1500
5.85 23640 17800 47280 1000 1500
2 14.2 37500 28250 61875 1200 2000
17.1 37500 28250 61875 1200 2000
20.2 31960 24070 52764 1200 2000
22.4 37500 28250 61875 1200 2000
26.4 31960 24070 52764 1200 2000
31.8 31960 24070 52764 1200 2000
3 53.7 37500 28250 61875 1500 2800
58.7 37500 28250 61875 1500 2800
64.8 37500 28250 61875 1500 2800
70.7 37500 28250 61875 1500 2800
83.2 31960 24070 52764 1500 2800
88.6 37500 28250 61875 1500 2800
99.6 31960 24070 52764 1500 2800
108.7 31960 24070 52764 1500 2800
121.3 31960 24070 52764 1500 2800
136.2 31960 24070 52764 1500 2800
158.1 31960 24070 52764 1500 2800
164.1 31960 24070 52764 1500 2800
191.1 31960 24070 52764 1500 2800
4 208.6 37500 28250 61875 1500 2800
230.2 37500 28250 61875 1500 2800
251.4 37500 28250 61875 1500 2800
277.5 37500 28250 61875 1500 2800
303.0 37500 28250 61875 1500 2800
328.5 37500 28250 61875 1500 2800
362.7 37500 28250 61875 1500 2800
379.5 37500 28250 61875 1500 2800
437.1 37500 28250 61875 1500 2800
496.0 37500 28250 61875 1500 2800
583.5 31960 24070 52764 1500 2800
677.7 31960 24070 52764 1500 2800
703.2 31960 24070 52764 1500 2800
762.5 31960 24070 52764 1500 2800
816.7 31960 24070 52764 1500 2800
986.8 31960 24070 52764 1500 2800
1067.3 31960 24070 52764 1500 2800
1289.7 31960 24070 52764 1500 2800
1554.5 31960 24070 52764 1500 2800

SX-110 (Right Angle)

Stages Ratio T2N(1.2M) T2N(6M) T2Peak n1N n1max
(Nm) (Nm) (Nm) (rpm) (rpm)
2 14.2 37500 28250 61875 1200 2000
16.7 31960 24070 52734 1200 2000
18.5 37500 28250 64875 1200 2000
21.8 31960 24070 52734 1200 2000
3 39.5 37500 28250 61875 1500 2800
47.7 37500 28250 61875 1500 2800
56.1 31960 24070 52734 1500 2800
60.9 37500 28250 61875 1500 2800
73.4 37500 28250 61875 1500 2800
86.4 31960 24070 52734 1500 2800
96.0 37500 28250 61875 1500 2800
112.9 31960 24070 52734 1500 2800
4 123.6 37500 28250 61875 1500 2800
148.9 37500 28250 61875 1500 2800
162.6 37500 28250 61875 1500 2800
175.2 31960 24070 52724 1500 2800
184.8 37500 28250 61875 1500 2800
194.6 37500 28250 61875 1500 2800
203.7 37500 28250 61875 1500 2800
222.7 37500 28250 61875 1500 2800
243.2 37500 28250 61875 1500 2800
266.2 37500 28250 61875 1500 2800
276.0 31960 24070 52724 1500 2800
291.1 37500 28250 61875 1500 2800
309.1 37500 28250 61875 1500 2800
317.9 37500 28250 61875 1500 2800
342.5 31960 24070 52724 1500 2800
373.5 37500 28250 61875 1500 2800
398.1 37500 28250 61875 1500 2800
412.8 31960 24070 52724 1500 2800
462.3 37500 28250 61875 1500 2800
558.7 37500 28250 61875 1500 2800
657.2 31960 24070 52724 1500 2800
792.2 31960 24070 52724 1500 2800
  • T2N values are calculated at n1=n1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
  • T2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
  • n1N is the rated input speed for continuous operation
  • n1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n1n please inquire
Dimensions
ST-110 / SX-110 Dimensions